PADS & MOUNTS
We carry a selection of isolation pads, vibration mounts and isolation hangers for structure-borne sound problems. These simple-to-use, effective vibration control products are ideal for floating a floor, decoupling a wall or as an isolation mount for home appliances.
Hard-to-solve problems, like the hum from a garage door opener or the shaking of a clothes washer, can be the last interference you would think about when designing your soundproof rooms.
-
Additional Information
Datasheet
Order with Us -
Isolation and Vibration Pads and Mounts
Many times the sub floor is in hard contact with the ceiling joist below and the banging of an appliance upstairs ruins the serenity of your media room or home theater. Rather than tearing things out to fix the problem, our little isolation kits can be the simple, effective noise solution you are after.
Do you have questions?
We have the answers you need!With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.
Call Today: (888) 666-5090
Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.
Distributor Map
PRIVACY SPEAKER COVERS
Privacy Fire Rated Speaker cover is a dome-shaped intumescent cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by in-ceiling loudspeakers.
The unique design gives the architect, specifier and installer more freedom in speaker selection as the covers are suited to a wide range of recessed speakers.
The flexible and lightweight nature of the covers makes installation quick and easy, reduces the stress put on the ceiling and significantly reduces labor costs compared to standard dry-walled box constructions.
The sound absorbing properties of the Privacy Fire Rated Speaker Cover enhance the acoustic rating of the structure for crisp and clean sound.
The high expansion and insulating properties of the cover ensures that both, flame spread and heat transmission, are stopped for 60 minutes. The reduction of heat loss through the cut out of the ceiling can result in significant energy savings.
- Inside Height 8" Diameter 13"
- Inside Height 11" Diameter 15"
Available in two different sizes:
- Can be used with any speaker manufacturer.
- Enhances the acoustic protection of the ceiling.
- Easy Installation - can be fitted in seconds - no screws, drilling or additional sealant required.
- Significant Labor savings.
- Lightweight (approx. 2.5 lbs).
- Flexible material enables cover to be fitted around obstructions or retro-fitted.
- In a fire, the intumescent material expands 5 times of its original thickness, preventing flame spread.
- Easy to remove and re-install for speaker maintenance.
- Reduced heat loss through the speaker cut out in the ceiling.
- Maintenance free.
- 60 minute protection.
Privacy Speaker Cover Benefits
PRIVACY RECESSED LIGHT COVERS
Maintaining a sound rated ceiling with can lights continues to be a difficult task. Until now the options included building drywall boxes or even using a lightweight concrete layer on the ceiling above. Both options are very costly, and in some cases impossible to do after the fact.
In renovation projects, basements and new construction the conflict between much wanted recessed lighting and the ability to provide measurable sound control would preclude the use of recessed lights. For low ceiling projects surface mounted lights are not an option either.
From a Home Theater Builder on www.doityourself.com The trouble with the cans is that even if they're airtight, they're still basically big hollow sounding boxes that break the insulation layer and block very little sound themselves.
Finally there is a simple effective solution for any ceiling fixture that will insure that the sound rating will remain intact. Using Privacy Recessed Light Covers involves simply placing the cover over your recessed fixture and constructing your ceiling as you normally would. It's really that simple. The benefits are two fold, soundproofing and thermal insulation through the ceiling.
Privacy Light Covers are UL Rated, and will meet the International Building Code for any type ceiling. Both one-hour and two-hour fire rated covers are available. Additionally, we carry covers for ceiling mounted speakers, fluorescent light fixtures and more.
Privacy Recessed Light Cover Options
One Hour Fire Rated Light Cover:
PRLC-1 is an one hour rated cover for both 6" and 8" recessed lights. Meet the Fire Code and block noise in or out of the room in one step.
Two Hour Fire Rated Light Cover:
PRLC-2 has a two hour fire rating where commercial requirements cannot be met with PRLC-1. Same easy installation and the same excellent noise control in one step.
Performance Light Covers:
When a fire rating is not required we have a version of our covers that will provide the same benefits at a lower cost. Residential applications with blown insulation are typical with our Performance Light Covers.
Privacy Florescent Light Covers Series
2x2 Privacy Florescent Light Covers:
is a pre-formed flexible cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by 2' by 2' fluorescent fixtures. Inside height 5" length 2' width 2'
2x4 Privacy Florescent Light Covers:
is a pre-formed flexible cover which has been designed to help maintain the integrity of fire rated ceilings when penetrated by 2' by 4' fluorescent fixtures. Inside height 5" length 4' width 2'
Related Products and Accessories
PRIVACY ACOUSTICAL PIPE WRAP
A composite material featuring a flexible one pound per square foot reinforced foil-faced loaded vinyl noise barrier bonded to a 1" thick quilted fiberglass sound absorber. Used to wrap noisy pipes, ducts, valves and fan housings.
Application of Pipe and Duct Wrap:
Privacy Acoustical Pipe Wrap Typically used to wrap noisy pipes and ducts to block the noise that transmits through the walls of the pipe or duct as air or other contents move through it. The quilted fiberglass decoupler improves the performance of the noise barrier as well as to provide sound absorption and thermal insulation around the pipe or ductwork.
The reinforced foil facing on the barrier readily accepts Reinforced Foil Tape for easy installation and also serves as a protective jacket for indoor or outdoor applications.
Privacy Acoustical Pipe Wrap Product Data
Transmission Loss and STC Performance
Related Products and Accessories
Do you have questions?
We have the answers you need!With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.
Call Today: (888) 666-5090
Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.
Distributor Map
ACOUSTICAL SEALING TAPE
Acoustical Seal tapes will effectively damp sound and vibration. High-tack adhesive backing adheres tightly to your soundproofing surfaces. Apply Acoustical Seam Tape over Soundproof Barrier seams to reduce sound leaks between rooms.
Vinyl Seam Tape
Heavy duty, very tacky seam tape to be used when soundproof barrier seams occur on the face of the wall studs. Vinyl Seam Tape will prevent buckling of the Soundproof Barrier seams before drywall is installed.
Dimensions: 2" x 150' rolls
Cost: $6
Foil Seam Tape
Used for acoustically sealing between stud/joist seams in Soundproof Barrier and all Floor Underlayments. Foil Seam Tape will insure that the seams remain as a vapor barrier in flooring applications over concrete.
Dimensions: 2.5" x 150' rolls, self adhering
Cost: $15
Reinforced Foil Tape
Used with Acoustical Pipe Wrap, this tape will not tear, and maintains vapor barrier requirement on HVAC and plumbing pipes, fan boxes, and ducts..
Dimensions: 3" x 150" rolls
Cost: $18
Do you have questions?
We have the answers you need!With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.
Call Today: (888) 666-5090
Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.
Distributor Map
PRIVACY REPLACEMENT DUCT
There are many applications where a silencer is not required. Typical occurrences are office to office noise in work environments. It not unusual with low cost office environments for the air space above a drop ceiling to open, not insulated, and for the ducts to be extremely lightweight. Voices from other offices or the hallway can easily migrate into the ducts and travel into your space.
In many cases we can reduce noise traveling through ducting by replacing a portion of the duct with Privacy Replacement Duct. These lightweight replacement sections are available 10' long, and are sized according to your existing ducts.
A perforated aluminum core is wrapped with a foil faced blanket of insulation to offer high R Value, and excellent noise reduction. Privacy duct is durable, easy to install, and will provide meaningful noise reduction in the voice ranges for all applications.
-
Additional Information
Datasheet
Duct Size Length Price 4" 10' $80.00 6" 10' $105.00 8" 10' $120.00 10" 10' $190.00 12" 10' $220.00 14" 10' $260.00 Minimum 50 ft. per order
Order with Us -
Length 10' standard (tip-to-tip) Velocity 3000 FPM Operating Temp 0-350?ã?° F Working Pressure 20" WC + and - Burst Pressure 40" WC Metal Core .0055" thick, AL 30003 - H111 Insulation 1.5" thick, .5 lb. density R-Value 4.5
Construction Detail of Privacy Replacement Duct
Perforated Metal Core:
The Privacy Duct Silencer core is constructed from one ply of perforated and corrugated aluminum with interlocked seams, folded flat and knurled for flexibility and strength.
Fiberglass Insulation Wrap:
The core is then completely wrapped with a blanket of fiberglass insulation.
Privacy Double Deflection Hangers
HND Series house a neoprene element in a sturdy steel housings. Top and bottom steel plates allow for uniform load distribution. All elements are color coded for ease of identification. HND has a projected collar to prevent metal to metal contact between rod and bracket.
-
Additional Information
Datasheet
Model Price HND-A $8.00 HND-B $16.00 Order with Us
| Isolators Dimension (inches) | |||||||
|---|---|---|---|---|---|---|---|
| MODEL | Max Load | Deflection | A | B | C | D | E |
| HND-A-1 | 30 | 2/5" | 3 | 1 3/8 | 2 | 2 1/4 | 3/8 |
| HND-A-2 | 40 | 2/5" | 3 | 1 3/8 | 2 | 2 1/4 | 3/8 |
| HND-A-3 | 70 | 2/5" | 3 | 1 3/8 | 2 | 2 1/4 | 3/8 |
| HND-A-4 | 115 | 2/5" | 3 | 1 3/8 | 2 | 2 1/4 | 3/8 |
| HND-B-1 | 165 | 1/2" | 4 1/2 | 1 7/8 | 2 1/4 | 3 | 1/2 |
| HND-B-2 | 235 | 1/2" | 4 1/2 | 1 7/8 | 2 1/4 | 3 | 1/2 |
| HND-B-3 | 375 | 1/2" | 4 1/2 | 1 7/8 | 2 1/4 | 3 | 1/2 |
| HND-B-4 | 545 | 1/2" | 4 1/2 | 1 7/8 | 2 1/4 | 3 | 1/2 |
- Easily works with 3⁄16" Threaded Rod
- Embedded steel plates for uniform loading
- Oil + water resistant element
- High deflection, low natural frequency
- Can be used to support metal channel, then a drywall ceiling is attached to the metal channel.
Notes:
- Do not exceed maximum load by more than 5%
Solve Your Soundproofing Problem
With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work. Call today for a price quote or additional info. (888) 666-5090
Privacy Wire Tie Isolation Hangers
Use Privacy Wire Tie Isolation Hangers to suspended steel grid ceiling systems and / or gypsum board ceiling.
-
Additional Information
Datasheet
Quantity Model HNW-1, HNW-2, HNW-3 1-250 $5.00 250-1000 $4.50 1000+ Call For Pricing Order with Us
| Isolator Model | Max Load | Deflection | Color |
|---|---|---|---|
| HNW-1 | 65 lbs | 1/5" | Red |
| HNW-2 | 120 lbs | 1/5" | Black |
| HNW-3 | 200 lbs | 1/5" | Blue |
Features:
- Easily works with all hangar wire
- Embedded steel plates for uniform loading.
- Oil + water resistant element
- High deflection, low natural frequency
- Can be used to support metal channel, then a drywall ceiling is attached to the metal channel.
Notes:
- Nuts, washer & rods by others
- Do not exceed maximum load by more than 5%
Solve Your Soundproofing Problem
With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work. Call today for a price quote or additional info. (888) 666-5090
Neoprene Door Seals
Door Jambs are a critical part of every soundproofing project. Unsealed gaps around your door will eliminate your soundproofing efforts. Our door jambs are made from a high-grade neoprene and will effectively seal the gap around your door. Order by the foot so even custom door and oversized doors can have a perfect seal.
Door Jamb Model DS79C
Anodized Clear Aluminum Door Jamb
Weatherstrip Neoprene Insert: 3/8" x 1-7/8"
Price*: $ 4.91 per foot
Order with Us
Door Jamb Model DS70C
Anodized Clear Aluminum Door Jamb
Weatherstrip Neoprene Insert: 3/16" x 1"
Price*: $ 2.91 per foot
Order with Us
Automatic Door Bottom
When designing your soundproofing project one of the most overlooked factors is the sound leaks at the doors. While you selected the perfect solutions for the wall, floor and ceilings, we can be defeated by noise getting under the door. Acoustical door seals will improve your already completed room, and are critical in your soundproofing design.
Sound Isolation Company offers a very simple fix for your doors, easy to install on any metal or wood door, provides an acoustically tight seal, and is available for shipment today just like everything we sell.
Existing doors or new ones, we have the solution for you; call us today and we will help you with the right solution.
-
Additional Information
Datasheet
1-5 Seals $79.00 5+ Seals $74.00 Order with Us -
Recommendations;
- 1) Use a solid wood door; this is better than solid core, or exterior metal doors.
- 2) Wait until the floor covering is installed before you trim the door.
- 3) Make sure the door stops at sides and top are in-line, and have no gaps, warps or bends.
- 4) Follow the simple installation instructions provided here to insure success.
PRIVACY DUCT SILENCER
Our Privacy Duct Silencers are designed to be the best performing insertable option for privacy between rooms. At 60" long and less than 10 lbs, these silencers will significantly reduce sound transmission from both the fan motor and noise created in your home theater, studio, or kids playroom.
Many times the ducting for heat and air is overlooked as a potential flanking path, sometimes reducing the effectiveness of our soundproofing design by 15%. We now have a cost effective, simple to install, solution for just this type problem.
Privacy Duct Silencers are compatible with rigid metal ductwork (round or square), and any flexible ducting. Silencers are sized according to diameter of the existing duct. The installation is as simple as making a 60" cutout in the existing duct and inserting the silencer, taping the joints, and you are done.
Radiated Noise Reduction
- Terminal box throttling damper noise will not go
through the attenuator wall into occupied space. - Eliminates box-to-box crosstalk noise.
- To enable calculating the fan noise reduction through
or past the terminal box to downstream components. - To substitute for double-wall duct in space where difficult offsets might occur.
-
Additional Information
Datasheet
Duct Size Length Price 6" 60" $150 8" 60" $170 10" 60" $200 12" 60" $230 14" 60" $270
Order with Us -
Length 5' standard (tip-to-tip) Velocity 3000 FPM Operating Temp 0-350?ã?° F Working Pressure 20" WC + and - Burst Pressure 40" WC Metal Core .0055" thick, AL 30003 - H111 Insulation 1.5" thick, .5 lb. density R-Value 4.5 Metal Sleeve Inner Ply .0025" thick, AL 1100 - H19
Outer Ply .003" thick, AL 3003 - 0
- Isolate Home Theater noise to adjacent rooms or upstairs
- Eliminate room to room noise from shared ducts in offices/plants
- To reduce fan noise from large HVAC units in commercial/hotels
- Stop fan noise traveling down the main duct to downstream discharges
Typical Silencer Uses
Construction Detail of Privacy Duct Silencer
Perforated Metal Core:
The Privacy Duct Silencer core is constructed from one ply of perforated and corrugated aluminum with interlocked seams, folded flat and knurled for flexibility and strength.
Fiberglass Insulation Wrap:
The core is then completely wrapped with a blanket of fiberglass insulation.
2-Ply Metal Sleeve:
The exterior sleeve is constructed with two plys of aluminum permanently fused together and corrugated, creating a continuous inner and outer surface that is airtight, flexible, and strong. Inlet and outlet collars are then attached to the ends.
SILENSEAL ACOUSTICAL SEALANT
Silenseal Acoustical Sealant is a water-based sealant designed to reduce sound transmissions in walls and partition systems. Its primary function is to achieve and maintain the specific STC (Sound Transmission Class) value of the system design.
Silenseal Acoustical Sealant remains permanently flexible and adheres firmly to wood or metal studs, concrete, gypsum board and most other types of building substrates. Maintains a tough rubber-like seal against air-borne sound, air infiltration and moisture. Our Silenseal Acoustical Sealant offers fast, smooth, easy application. Clean up is also quick and easy with just soap and water.
Field tested and field proven, Silenseal Acoustical Sealant is recognized across the country by drywall manufacturers and architects as an effective means of reducing sound transmission.
-
Additional Information
Datasheet
Installation Manual
MSDS
4 Tubes $38.00 Case (12) $90.00 Pallet (504) $2520.00 Order with Us -
Coverage
| Coverage (29 oz. tube) | |
|---|---|
| 1/4 inch bead | 89 linear feet |
| 3/8 inch bead | 40 linear feet |
| 1/2 inch bead | 22 linear feet |
Apply a 1/4" (6mm) bead of acoustical caulk around the perimeter of wall assemblies. Fill to depth of panel. Completely fill voids and larger openings. Apply to seal all openings formed from outlets, lights and electrical box installations.
Benefits
- UL tested and classified.
- VOC compliant.
- Non-flammable formulation.
- Easy application and easy clean up.
- Will not harden, crack or separate.
- Non-staining and non-migrating.
- High degree of adhesive and cohesive strength.
Do you have questions?
We have the answers you need!With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.
Call Today: (888) 666-5090
Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.
Distributor Map
SEALTIGHT PUTTY PADS
Sealtight Putty Pads are designed to be applied to the external surfaces of metallic and nonmetallic electrical boxes. They are applied to the back surface of the box, as well as the three sides that are away from the stud, to combat sound bleed through the electrical box cutout in a wall.
Install Sealtight Putty Pads after the gypsum board is applied to one side of the wall and before it is closed in on the other side. Installing the Putty Pad after one side of the wall is covered with drywall requires some technique. The pad must be applied to the box and then either lapped over the front of the tile plate (if one is used) or excess material must be worked toward the front of the box and built up into a compressible gasket much like the pinched area of a pie crust. This gasket compresses between the front edge of the box and the gypsum board as it is installed.
-
Additional Information
Datasheet
Installation Manual
-
Do you have questions?
We have the answers you need!With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.
Call Today: (888) 666-5090
Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.
Distributor Map
