SEALTIGHT PUTTY PADS

Sealtight Putty Pads are designed to be applied to the external surfaces of metallic and nonmetallic electrical boxes. They are applied to the back surface of the box, as well as the three sides that are away from the stud, to combat sound bleed through the electrical box cutout in a wall.

Install Sealtight Putty Pads after the gypsum board is applied to one side of the wall and before it is closed in on the other side. Installing the Putty Pad after one side of the wall is covered with drywall requires some technique. The pad must be applied to the box and then either lapped over the front of the tile plate (if one is used) or excess material must be worked toward the front of the box and built up into a compressible gasket much like the pinched area of a pie crust. This gasket compresses between the front edge of the box and the gypsum board as it is installed.

• Additional Information

  Datasheet
  Installation Guide
  
  Order with Us
• 

• 

• Do you have questions?
  We have the answers you need!

  With Sound Isolation Company you will get the help you need: expert design, product selection and installation instruction. We have the experience you need for a partnership that will work.

  Call Today: (888) 666-5090

• Our soundproofing products and materials are in stock and ready to ship today from 10 different distributor locations.

  Distributor Map